Tape water filter

For the treatment of water before and after reverse osmosis

The filter cartridges are used in pressure resistant standard 10 inch filter housings. This standard size means that the filter cartridges can be interchanged. They are available not only as complete filters (housing and cartridge), but also as spare cartridges. The following types are available:
Coarse filter 50 µm
Used when tap water is heavily soiled with sediment, then this pre-reverse osmosis coarse filter should be used.
Fine filter 5µm
Used to remove fine sediment particles.
Combination filter
A fine filter (5µm) combined with activated carbon. This filter is included in the S 300 – S 600 reverse osmosis units.
Activated Carbon filter
Used to remove chlorine, organics and sediments before reverse osmosis. It can also be used in combination with the 5- µm sediment filter prior to the reverse osmosis unit.
Demineralization filter
Used to remove the last remaining pollutants using a special ion exchange resin, and is placed after the reverse osmosis unit.
Hardness filter
Filled with Hydrocarbonate, this filter is placed after the reverse osmosis unit to enrich the water with minerals. If CO2 is injected into the filter, the calcium concentration can be raised even further. The complete filter (housing and cartridge)
includes a CO2 injection port.


 
Search